The butterfly valve
Butterfly valves: The body consists of a compact gearbox on the body, with a flap integrated with the shafts on the body and a design in accordance with the opening and closing torque capacities. * High precision machined stainless steel seat surface filled with robot welding (AISI 308-316 LSI). * One-piece rubber retaining ring easily removable without requiring special tools without removing the valve flap. * Excellent sealing on shaft with multiple oring system at front and rear sealing. * High corrosion resistance and high strength bronze bushing * Minimum AISI 420 stainless steel shafts with wedge connection. * Excellent angular alignment of the worm-counter-gear in the gearbox and minimal friction in force transmission. * Wras approved electrostatic epoxy paint.
Gate Valve
It is used in all pipe systems to facilitate assembly and disassembly of flanged valves. Provides ease of disassembly by taking the axial forces on the valve in the pipeline. During assembly and disassembly, the length of the disassembly part is shortened to +, - 40mm to create the required working area. Our disassembly parts are manufactured as semi-rigid. Upon request, full rigid and telescopic types are also available. The rigid design disassembly allows installation without additional bolts and screws..
"
Hydrate
They are hydrants which have two outlet water intake ports on the ground (optional 3 outlet) which are used to receive water by hose in pressurized water networks. The shaft which controls the hydrant valve consists of spring valve, check valve, hose connection fittings and casting parts forming the main body. By means of the hydrant switch, the shaft is controlled and opened and closed. When the shaft is turned counterclockwise, the travel pipe moves downwards. Thus, the valve parts in the body move down and the hydrant is opened. When the shaft is turned clockwise, the hydrant is turned off. The valve closes in the flow direction of the water. Thus, the sealing of the valve under pressure in the system is increased. This system creates turbulence-free and linear flow, reduces pressure loss, prevents vibrations and extends the life of the hydrant. Thus, it enables the spraying of water over longer distances. In order to discharge the water in the hydrant, especially in cold weather, the hydrant must be closed. Spring pressure valve automatically opens because there is no pressure, drains water above the valve from the valve.
Disassembly Joint
It is used in all pipe systems to facilitate assembly and dismantling of flanged valves. Provides ease of dismantling by taking the axial forces on the valve in the pipeline. During assembly and dismantling , the length of the dismantling part is shortened to +, - 40mm to create the required working area. Our dismantling joint are manufactured as semi-rigid. Upon request, full rigid and telescopic types are also available. Rigid design dismantling allows mounting without additional bolts and screws..
Single Orifice Air Valve
When water is supplied to the pump outlets and pipelines, the accumulation of air in the system, especially at the pump outlets, reduces the capacity of the water by narrowing the passage area. Single sphere suction cups are used to prevent this negativity. The air formed in the system is filled into the suction cup before the water and thrown out of the hole in the cover. Afterwards, the suction cup is filled with water and lifts the ball up and the holes are closed to provide sealing.
Additional Parts
It is used in all pipe systems to facilitate assembly and disassembly of flanged valves. Provides ease of disassembly by taking the axial forces on the valve in the pipeline. During assembly and disassembly, the length of the disassembly part is shortened to +, - 40mm to create the required working area. Our disassembly parts are manufactured as semi-rigid. Upon request, full rigid and telescopic types are also available. The rigid design disassembly allows installation without additional bolts and screws.